Box pleat skirt Free Paper pattern & How to make DRCOS

This is a pattern and instructions for making a box pleat skirt, often seen in cosplay costume designs.

The box pleat skirt is available in two patterns: one with a separate fabric for the folds, and the other with darts and folds.

This pattern is a basic type made with darts and folds.

This type has two box pleats in the front and two in the back.

The skirt length is a little long, so we would be happy if you could cut the pattern and use it when making a cosplay costume.

After printing, paste the paper along the dotted lines and cut it to use.

Paper pattern has a seam allowance (S/A), so it can be used as is.

The production process is explained with translation software.

If you have any suggestions on how to write like this, please let us know at info@dr-cos.com

We operate this site with your cooperation.

(1) Sew darts and iron down seam allowance.

How to sew darts

(2) Serging the sides of the "Front body" and the "Back body", and then attach the anti-stretch tape at the zipper position until it reaches the seam stop.

How to Serge/overlock (sewing machine & overlock sewing machine)

How to use stay tape

(3) Sew "Front body" and "Back body" together and press seam allowances open with an iron.

* The zipper should be on the left side when the garment is worn.

(4) Serging the hem of the "body", iron up 0.5 inch and sew it with a sewing machine.

(5) Fold in the "Pleat line" with an iron.

(6) Attach invisible zip

(7) Stitch at the "stitch" position.

(8) Attach the belt.

Preparation of belt section

(9) Sew the hooks and snap buttons.

How to sew the hook

How to sew a hook "bar eye" version

Free Paper Pattern is supported by your help in spreading the word!
If you use Paper pattern, please post it on social networking sites and tell your friends about it!
Please help spread the word about DRCOS for future operations!