Puff sleeve Dress Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is the pattern for a dress with puff sleeves, waist seam, and a circular skirt with a 360-degree flare, as requested frequently.

The waist section is designed to be snug, allowing for a voluminous silhouette when worn with a panier.

It features a simple construction, making it recommended as a base pattern.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Apply fusible interlining to the "Front facing", "Back facing", and "Cuff" using an iron.

(2) Stitch the facings together, press open the seam allowance (S/A) with an iron, and serge/overlock the outer side.

How to Serge/overlock (sewing machine & overlock sewing machine)

(3) Sew the darts on the "Back bodice" and press them towards the "Body" center line with an iron.

How to sew darts

(4) Serge/overlock the shoulders and sides of the "Front bodice", "Back bodice", and both sides of the "Front bodice side".

(5) Stitch the sides and shoulders of each "Body" except for the center line on the "Back bodice", and press open the seam allowance (S/A) with an iron.

(6) Serge/overlock the sides of the "skirt Back bodice" and "skirt Front bodice", stitch them together, and press open the seam allowance (S/A) with an iron.

(7) Stitch the "Body" and skirt together, serge/overlock and fold down the seam allowance (S/A) towards the bottom with an iron.

(8) Serge/overlock the "Back bodice" center from the "Body" to the skirt and apply stay tape.

How to use stay tape

(9) Stitch up to the Sewing stop position on the skirt, then press seam allowances open with an iron.

(10) Serge/overlock the hem of the skirt and fold it up by 1cm (0.5in), then sew on a sewing machine.

(11) Sew the zipper in place at the zipper position.

(12) Attach the "facing" to the "Body", make cuts in the fuzzy part of the seam allowance (S/A), then flip it inside out and shape with an iron.

(13) Stitch the "Cuff" together and shape with an iron to allow it to be sandwiched.

(14) Insert gathers at various positions on the "Sleeve", then sandwich the "Cuff" into the "Sleeve" hem and sew in place.

(15) Attach the "Sleeve" to the "Body" and sew a Hook & bar eye at the Hook position.

How to sew the hook

How to sew a hook "bar eye" version

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---

---