Comments are made using translation software.
This is a pattern for a jersey with a raglan sleeve design.
Lines are drawn on the sleeves to easily attach decorations with bias tape. Try adding one or two lines and design accordingly.
The neckline, sleeves, and waist are ribbed, but feel free to adjust if you dislike ribbing.
The pockets are not dummy pockets but proper welt pockets, so they are slightly more challenging.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
I'm not so good at English.
So all explanations/instructions were translated using AI.
This is not always perfect and I apologise for any parts that are difficult to follow.
(1) Create a Welt pocket on the Body.
* For instructions on how to create a Welt pocket, please refer to the website.
(2) Sew the bias tape onto the “Sleeve”.
* Use the same material when attaching the bias tape.
(3) Sew the sides of the “Front Body” and “Back Body” together and Serging the edges.
How to Serge/overlock (sewing machine & overlock sewing machine)
(4) Sew the sides of the “Sleeve” together and Serging the edges.
(5) Sew the “Sleeve rib” to form a loop and prepare it for insertion.
(6) Insert the “Sleeve rib” into the sleeve and sew it together.
(7) Attach the armhole section to the Body and finish the edges.
(8) Sew the “Front body rib” and “Back body rib” together, preparing them for insertion.
(9) Attach the “Neck rib” and “Body rib” by sewing them together.
(10) Serging the front center and apply stay tape.
(11) Attach the open zipper.