Comments are made using translation software.
The pattern was produced to make the lines a little sharper than a normal blouse so that the blouse would follow the body and look beautiful when worn.
This pattern is for a blouse with a pointed hem tip.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
I'm not so good at English.
So all explanations/instructions were translated using AI.
This is not always perfect and I apologise for any parts that are difficult to follow.
(1) Fold the button position of the "Front bodice" with an iron and sew on a sewing machine.
* If you fold twice towards the front, you'll get a fold line, and if you fold twice towards the back, only the stitching line will be visible. Please fold according to your preference and the image.
(2) Sew the darts of the front and "Back bodice," and iron and fold the seam towards the center.
(3) Serge/overlock the center and both sides of the "Back bodice," sew them together until the sewing stop position, and press open the seam allowance with an iron.
How to Serge/overlock (sewing machine & overlock sewing machine)
* Be careful not to sew up to the hem, as you won't be able to fold the hem at 1cm.
(4) Serge/overlock the shoulder part and sew it together, then press open the seam allowance with an iron.
(5) Attach fusible interlining to one side of the "Collar," sew together two pieces of "Collar" with the "Body" side open, turn them inside out, and settle the shape with an iron.
(6) Before sandwiching the "Collar," make vertical incisions at the part marked "⑥," tuck the end inward, and sew on a sewing machine.
* Process both sides in the same way.
(7) Attach the "Collar" to the "Body."
* Make sure the incision part is also tucked inside, sandwich it, and sew on a sewing machine.
(8) Serge/overlock the "Body" hem, fold it 1cm with an iron, and sew on a sewing machine.
(9) Serge/overlock both sides and the hem of the "Sleeve," sew both sides together, and press open the seam allowance with an iron.
* It's easier to serge/overlock the "Sleeve" hem first.
(10) Fold the "Sleeve" hem 1cm with an iron and sew on a sewing machine.
(11) Attach the "Sleeve" to the "Body" and serge/overlock it.
(12) Make buttonholes and sew buttons.
If you cannot see the SHOP due to 403 error
Children's 140 size
bust 75cm waist 63.5cm A4 paper size 10 sheets
Sleeve parts 37 size
Children's 10 size
bust 29.5in waist 25in letter paper size 11 sheets
Sleeve parts 37 size
Ladies' S size
bust 82.5cm waist 70cm A4 paper size 12 sheets
Sleeve parts 39 size
Ladies' S size
bust 32.5in waist 27.6in letter paper size 13 sheets
Sleeve parts 39 size
Ladies' M size
bust 88cm waist 75cm A4 paper size 13 sheets
Sleeve parts 41 size
Ladies' M size
bust 34.6in waist 29.5in letter paper size 13 sheets
Sleeve parts 41 size
Ladies' L size
bust 94.5cm waist 80cm A4 paper size 14 sheets
Sleeve parts 44 size
Ladies' L size
bust 37.2in waist 31.5in letter paper size 15 sheets
Sleeve parts 44 size
Ladies' LL size
bust 102cm waist 86.5cm A4 paper size 15 sheets
Sleeve parts 48 size
Ladies' LL size
bust 40.2in waist 34.1in letter paper size 16 sheets
Sleeve parts 48 size
Men's L size
bust 108cm waist 92cm A4 paper size 17 sheets
Sleeve parts 52 size
Men's L size
bust 42.5in waist 36.6in letter paper size 17 sheets
Sleeve parts 52 size
Men's LL size
bust 114cm waist 98.5cm A4 paper size 18 sheets
Expanded sleeve parts 56 sizes to 104.5%
Men's LL size
bust 44.9in waist 38.8in letter paper size 20 sheets
Expanded sleeve parts 56 sizes to 104.5%
Paper pattern & how to make
How to use Paper pattern
Each process How to make
Shop
X(Twitter)
pinterest
Instagram
facebook
Contact Us/Q&A
Japanese Site