Comments are made using translation software.
Here is the pattern for the jacket with a large stand collar, as requested by many.
The shoulder width is designed to be slightly wider, and the sleeve length is a bit longer than the Stand Collar Jacket I, with a tighter fit. The armholes are also smaller than in the Stand Collar Jacket I.
The bust area is generously sized, and there are no darts or shaping in the bodice, so it's made to fit loosely and be oversized.
The neckline is wider than usual, and the stand collar is designed to extend outward.
If you also want a lining, there is a line for the facing included, so you can create your own lining pattern from there.
There are box pockets near the hem of the bodice.
The closure at the center is with velcro, not a zipper. If you want to change it to a zipper, please modify it yourself.
This design is made to be very easy to work with as a base material for modifications.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
The production process is explained with translation software.
(1) Create a Welt pocket on the "Front bodice."
(2) Apply fusible interlining to the front placket, fold it in half, and shape it for easy ironing.
(3) Sew velcro (soft side) onto the back surface of the front placket.
(4) Serge/overlock the shoulder, side, and back center line of the "Front bodice" and "Back bodice."
How to Serge/overlock (sewing machine & overlock sewing machine)
(5) Sew together the shoulder and side of the "Body," and press the seam allowances open with an iron.
(6) Serge/overlock the hem of the "Body," then fold it up 1cm (0.5in) and sew it on a sewing machine.
(7) Apply fusible interlining to the "Collar stand," sew the upper side, and press open the seam allowance with an iron.
(8) Fold the lower side of the "Collar stand" to be sandwiched, iron it, then sew it onto the "Body" while sandwiching.
(9) Attach the front placket to the "Body" by sewing, and sew velcro (hard side) onto the surface on the back side.
(10) Serge/overlock the side of the "Sleeve," sew it together, and press the seam allowance open with an iron.
(11) Serge/overlock the hem of the "Sleeve," fold it up 1cm (0.5in), and sew it with a sewing machine.
(12) Attach the "Sleeve" to the "Body" and serge/overlock it.
How to purchase pay pattern from overseas
shoulder15.6in bust32.7in length23.4in 18sheets of A4 size(or legal size)
Sleeve parts 41 size
shoulder17.7in bust37.4in length24.4in 18sheets of A4 size(or legal size)
Sleeve parts 43 size
shoulder18.1in bust40.6in length26.2in 18sheets of A4 size(or legal size)
Sleeve parts 46 size
shoulder18.7in bust44.1in length27in 19sheets of A4 size(or legal size)
Sleeve parts 49 size
shoulder18.9in bust45.7in length27.6in 21sheets of A4 size(or legal size)
Sleeve parts 53 size
shoulder20.1in bust47.2in length31.7in 23sheets of A4 size(or legal size)
Expanded sleeve parts 56 sizes to 102.9%
shoulder20.7in bust50in length33.9in 25sheets of A4 size(or legal size)
Expanded sleeve parts 56 sizes to 110.3%