Hood Mantle Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here's the pattern and instructions for making a hooded cape (outerwear) with an oversized hood.

Since the cape is slightly shifted to the right, the pattern will be asymmetrical on both sides.

Simply sew together and add buttons and buttonholes, making it a beginner-friendly cape pattern.

I don't think you'll find commercially available patterns with hoods this extremely large.

This design will be specialized for cosplay costumes.

If your sewing machine doesn't have a buttonhole function, you can use Velcro instead of buttons.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

* When making with a lining, turn each pattern piece over and cut the same number of pieces from the lining fabric.

* When attaching the lining, the easiest way is to first make the hood, then sew the cloak with a bag seam, sandwiching the hood into the neck area, and turn it inside out.

(1) Serge/overlock and sew along the dotted line (A) of the "Hood," then press the seam allowances open with a stitch.

How to Serge/overlock (sewing machine & overlock sewing machine)

(2) Align and sew the "Hood" and "Mantle" together at the hood alignment position, then serge/overlock.

(3) Serge/overlock all around from the "Hood" to the "Mantle," fold back 1 cm (0.5 in) with an iron, and sew with a sewing machine.

(4) Make buttonholes.

How to make buttonholes.

(5) Sew on the buttons.

How to sew on buttons.

If you cannot see the SHOP due to 403 error

---

---

---

---

---