Boots cover 3 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for boot covers that resemble armor and open at the back with an open zipper.

You might wonder why it needs to open completely. The reason lies in the ability to make the ankles appear slimmer. Typically, with boot covers, if they don't accommodate the heel, they tend to have a loose design around the ankles. However, with the design that opens with an open zipper, it's possible to finish that area with a slimmer profile.

However, for this armor-like boot cover, it's necessary to assemble the parts using synthetic leather, and if you make a mistake with the sewing machine, you'll be using materials like enamel or score leather, which show machine holes, making it quite challenging.

Moreover, tasks like bias-cutting the score leather for edging are particularly difficult...

Please be aware that this is quite challenging, especially for sewing beginners.

Intermediate or higher sewing skills are required.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

*When cutting suede or synthetic leather, use a cutter and cutting mat, and secure it neatly with cellophane tape before cutting.

*When cutting with a cutter, make sure to cut in a sharp condition by either folding the blade or using a new replacement blade.

(1) Align the toe parts with the center line of the toe synthetic leather tape and topstitch them in place.

*If it's difficult to attach the toe synthetic leather tape with pins, using double-sided tape on the toe synthetic leather tape is convenient.

*When using double-sided tape, applying sewing machine oil to the sewing needle makes it less sticky and easier to sew.

(2) Attach the Velcro at the Velcro positions on the boot heel.

(3) Attach the left and right symmetrical boot heels and topstitch them in place.

*All parts where Velcro is attached should be the same.

(4) Topstitch the boot decorations in place.

(5) When attaching the bump to the base, sandwich the toe at the bump overlap position and topstitch them together.

(6) Connect four pieces of shaft with shaft joint synthetic leather tape.

*If it's difficult to use pins, use double-sided tape on the synthetic leather tape.

*Pay attention to the zipper attachment position.

(7) After attaching the shaft and base joint synthetic leather tape to the shaft, attach the shaft to the base.

*To make it easier to attach the shaft to the base, the base's foot circumference is slightly larger, and it's easier to make by aligning the pre-marked points first.

(8) Sew an open zipper at the zipper attachment position.

(9) Secure the shaft bias tape by stitching it while sandwiching bias tape on the top and bottom of the shaft.

How to make bias tape

How to sew bias tape

*Suede bias tape is quite stiff and difficult to attach with pins, so fold it in half and shape it firmly.

*It's easiest to attach pins on the front and back sides of the bias tape separately.

(10) Attach the boot heel to the boot heel attachment position.

*It's okay to stitch only the dotted lines; please pay attention to the orientation of the Velcro when attaching.

(11) Attach the elastic at the elastic attachment positions.

*If it's difficult to attach the elastic with a sewing machine, please securely attach it by hand sewing.

(12) Attach the boot decorations with hand sewing.

*Adjust the position of the boot decorations so that they don't interfere when actually walking by attaching them with only two points and allowing them to move; it creates a better atmosphere.

Ladies'-S size

Can be downloaded

shoesize8.7-9.1in 7sheets of A4 size(or legal size)

Currently, only Japanese patterns are available.

---

Ladies'-M size

Can be downloaded

shoesize9.4-9.8in 8sheets of A4 size(or legal size)

Currently, only Japanese patterns are available.

---

Ladies'-L size

Can be downloaded

shoesize10.2-10.6in 10sheets of A4 size(or legal size)

Currently, only Japanese patterns are available.